How To Install Hardie Siding Panels

How To Stagger Lap Siding.

There are a few easy steps to install a hardie siding around your windows like a professional. Thus, installing hardie board siding on a one story house of 1,600 sq.ft. You can see a couple problems in this photo.

I Like To Use Crews Better For Hanging Things On The Cement Board.

With some 2 x 4’s, some plywood panels, and some clever engineering, we crafted an additional layer of wood. Hardie panel siding is slightly cheaper, with prices ranging anywhere between $0.67 and $5.00 per square foot. Refer to colorplus section on page 3.

The Top And Base Of The Frame Must Be Finished With A Ventilation Grille.

We knew we couldn’t approach this james hardie siding installation like any other. • do not use hardiepanel vertical siding in fascia or trim applications. This video will outline the basics of installing james hardie's fiber cement products.

Fasten Flashing With A Hammer And Galvanized Flashing Nails.

Wood studs, a.083” x.187” x 1.5” ring shank siding nail is recommended. High nails are very common from inexperienced james hardie installers, because they think the nails can go anywhere above the nail line. Place all nails 3/8 inch from the hardiepanel edge and at least 2 inches from any corner.

Position Nails ¾” To 1” From The Edge Of The Siding.

Drive the nails to be just flush with the surface of the panel, but not so deep that the nails dimple the panel surface. Put metal flashing and caulk around all windows, doors and other openings, such as exhaust vents. Hardie plank siding is more expensive than other types of siding but it’s worth the investment.